Index of /pics/darren/646-repower

Icon  Name                                                                                            Last modified      Size  Description
[DIR] Parent Directory - [IMG] 4ft. blade, $100.JPG 02-Sep-2008 10:12 48K [IMG] 4ft. blade, $100_small.JPG 07-Sep-2011 12:22 3.0K [IMG] 646 home on trailer 1.JPG 02-Sep-2008 10:12 64K [IMG] 646 home on trailer 1_small.JPG 07-Sep-2011 12:22 3.9K [IMG] 646 home on trailer 2.JPG 02-Sep-2008 10:12 69K [IMG] 646 home on trailer 2_small.JPG 07-Sep-2011 12:22 4.1K [IMG] 646 in shop prelim mockup.JPG 02-Sep-2008 10:12 53K [IMG] 646 in shop prelim mockup_small.JPG 07-Sep-2011 12:22 3.3K [IMG] Bannana plate, actuator pin and foot control.JPG 02-Sep-2008 10:12 28K [IMG] Bannana plate, actuator pin and foot control_small.JPG 07-Sep-2011 12:22 2.2K [IMG] Bowl vent.JPG 02-Sep-2008 10:12 38K [IMG] Bowl vent_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Center lift eliminated.JPG 02-Sep-2008 10:12 29K [IMG] Center lift eliminated_small.JPG 07-Sep-2011 12:22 2.7K [IMG] Cheap throttle cable repair.JPG 02-Sep-2008 10:12 39K [IMG] Cheap throttle cable repair_small.JPG 07-Sep-2011 12:22 2.6K [IMG] Closeup of foot control 1.JPG 02-Sep-2008 10:12 38K [IMG] Closeup of foot control 1_small.JPG 07-Sep-2011 12:22 2.8K [IMG] Closeup of foot control 2.JPG 02-Sep-2008 10:12 34K [IMG] Closeup of foot control 2_small.JPG 07-Sep-2011 12:22 2.5K [IMG] Closeup of pump installed in supplied mount.JPG 02-Sep-2008 10:12 31K [IMG] Closeup of pump installed in supplied mount_small.JPG 07-Sep-2011 12:22 2.8K [IMG] Cracked loader frame.JPG 02-Sep-2008 10:12 44K [IMG] Cracked loader frame_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Custom made exhaust clamp.JPG 02-Sep-2008 10:12 26K [IMG] Custom made exhaust clamp_small.JPG 07-Sep-2011 12:22 1.9K [IMG] DSC_0358.JPG 02-Sep-2008 10:12 34K [IMG] DSC_0358_small.JPG 07-Sep-2011 12:22 3.1K [IMG] DSC_0359.JPG 02-Sep-2008 10:12 41K [IMG] DSC_0359_small.JPG 07-Sep-2011 12:22 3.3K [IMG] DSC_0360.JPG 02-Sep-2008 10:12 39K [IMG] DSC_0360_small.JPG 07-Sep-2011 12:22 3.1K [IMG] DSC_0366.JPG 02-Sep-2008 10:12 34K [IMG] DSC_0366_small.JPG 07-Sep-2011 12:22 3.2K [IMG] DSC_0367.JPG 02-Sep-2008 10:12 27K [IMG] DSC_0367_small.JPG 07-Sep-2011 12:22 2.7K [IMG] DSC_0372.JPG 02-Sep-2008 10:12 33K [IMG] DSC_0372_small.JPG 07-Sep-2011 12:22 2.9K [IMG] DSC_0394.JPG 02-Sep-2008 10:12 29K [IMG] DSC_0394_small.JPG 07-Sep-2011 12:22 2.4K [IMG] DSC_0412.JPG 02-Sep-2008 10:12 31K [IMG] DSC_0412_small.JPG 07-Sep-2011 12:22 2.2K [IMG] DSC_0413.JPG 02-Sep-2008 10:12 48K [IMG] DSC_0413_small.JPG 07-Sep-2011 12:22 2.9K [IMG] DSC_0414.JPG 02-Sep-2008 10:12 23K [IMG] DSC_0414_small.JPG 07-Sep-2011 12:22 2.0K [IMG] Direction and attachment control lower mount and foot control pin.JPG 02-Sep-2008 10:12 22K [IMG] Direction and attachment control lower mount and foot control pin_small.JPG 07-Sep-2011 12:22 2.1K [IMG] Direction control as found 1.JPG 02-Sep-2008 10:12 47K [IMG] Direction control as found 1_small.JPG 07-Sep-2011 12:22 3.4K [IMG] Direction control as found 2.JPG 02-Sep-2008 10:12 35K [IMG] Direction control as found 2_small.JPG 07-Sep-2011 12:22 2.6K [IMG] Early & late hood 1.JPG 02-Sep-2008 10:12 25K [IMG] Early & late hood 1_small.JPG 07-Sep-2011 12:22 2.2K [IMG] Early & late hood 2.JPG 02-Sep-2008 10:12 41K [IMG] Early & late hood 2_small.JPG 07-Sep-2011 12:22 2.5K [IMG] Early & late hood 3.JPG 02-Sep-2008 10:12 29K [IMG] Early & late hood 3_small.JPG 07-Sep-2011 12:22 2.2K [IMG] Early 646 repower cust. exhaust.JPG 02-Sep-2008 10:12 35K [IMG] Early 646 repower cust. exhaust_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Early 646 repower custom exhaust.JPG 02-Sep-2008 10:12 41K [IMG] Early 646 repower custom exhaust_small.JPG 07-Sep-2011 12:22 3.4K [IMG] Early 646 repower hyd. filt. location.JPG 02-Sep-2008 10:12 52K [IMG] Early 646 repower hyd. filt. location_small.JPG 07-Sep-2011 12:22 3.5K [IMG] Earning it's keep, trash detail.JPG 02-Sep-2008 10:12 35K [IMG] Earning it's keep, trash detail_small.JPG 07-Sep-2011 12:22 2.6K [IMG] Engine mount mockup 3 inch height perfect.JPG 02-Sep-2008 10:12 39K [IMG] Engine mount mockup 3 inch height perfect_small.JPG 07-Sep-2011 12:22 3.1K [IMG] Exhaust after 8 hr's hard use.JPG 02-Sep-2008 10:12 47K [IMG] Exhaust after 8 hr's hard use_small.JPG 07-Sep-2011 12:22 3.4K [IMG] Exhaust heat sheild 1.JPG 02-Sep-2008 10:12 42K [IMG] Exhaust heat sheild 1_small.JPG 07-Sep-2011 12:22 3.3K [IMG] Finished project, for now 1.JPG 02-Sep-2008 10:12 52K [IMG] Finished project, for now 1_small.JPG 07-Sep-2011 12:22 3.3K [IMG] Finished project for now 2.JPG 02-Sep-2008 10:12 50K [IMG] Finished project for now 2_small.JPG 07-Sep-2011 12:22 3.1K [IMG] Finished project for now 3.JPG 02-Sep-2008 10:12 52K [IMG] Finished project for now 3_small.JPG 07-Sep-2011 12:22 3.3K [IMG] Finished project for now 4.JPG 02-Sep-2008 10:12 52K [IMG] Finished project for now 4_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Floor board to pump bracket.JPG 02-Sep-2008 14:44 321K [IMG] Floor board to pump bracket_small.JPG 07-Sep-2011 12:22 2.5K [IMG] Foot control only and frame repair.JPG 02-Sep-2008 10:12 46K [IMG] Foot control only and frame repair_small.JPG 07-Sep-2011 12:22 3.1K [IMG] Foot control pin made from half inch dia. Grade 8 bolt.JPG 02-Sep-2008 10:12 22K [IMG] Foot control pin made from half inch dia. Grade 8 bolt_small.JPG 07-Sep-2011 12:22 1.7K [IMG] Grader blade and 26 3 point hitch.JPG 02-Sep-2008 10:12 35K [IMG] Grader blade and 26 3 point hitch_small.JPG 07-Sep-2011 12:22 2.3K [IMG] Hyd. leak from the bucket cyl.JPG 02-Sep-2008 10:12 32K [IMG] Hyd. leak from the bucket cyl_small.JPG 07-Sep-2011 12:22 2.2K [IMG] Hydraulic filter location.JPG 02-Sep-2008 10:12 36K [IMG] Hydraulic filter location_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Missing direction and attachment lift controls.JPG 02-Sep-2008 10:12 35K [IMG] Missing direction and attachment lift controls_small.JPG 07-Sep-2011 12:22 2.9K [IMG] Modified motor mount.JPG 02-Sep-2008 10:12 33K [IMG] Modified motor mount_small.JPG 07-Sep-2011 12:22 3.1K [IMG] Modified motor mount and oil drain relocated.JPG 02-Sep-2008 10:12 38K [IMG] Modified motor mount and oil drain relocated_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Motor mount too tall 1.JPG 02-Sep-2008 10:12 24K [IMG] Motor mount too tall 1_small.JPG 07-Sep-2011 12:22 2.3K [IMG] Motor mount too tall 2.JPG 02-Sep-2008 10:12 38K [IMG] Motor mount too tall 2_small.JPG 07-Sep-2011 12:22 2.5K [IMG] No jack, no problem! 1.JPG 02-Sep-2008 10:12 40K [IMG] No jack, no problem! 1_small.JPG 07-Sep-2011 12:22 2.7K [IMG] No jack, no problem 2.JPG 02-Sep-2008 10:12 27K [IMG] No jack, no problem 2_small.JPG 07-Sep-2011 12:22 2.1K [IMG] Note travel valve relief in too far.JPG 02-Sep-2008 14:44 366K [IMG] Note travel valve relief in too far_small.JPG 07-Sep-2011 12:22 2.7K [IMG] Pepper pot muffler 1.JPG 02-Sep-2008 10:12 50K [IMG] Pepper pot muffler 1_small.JPG 07-Sep-2011 12:22 3.5K [IMG] Pepper pot muffler 2.JPG 02-Sep-2008 10:12 34K [IMG] Pepper pot muffler 2_small.JPG 07-Sep-2011 12:22 2.9K [IMG] Pepper pot muffler 3.JPG 02-Sep-2008 10:12 30K [IMG] Pepper pot muffler 3_small.JPG 07-Sep-2011 12:22 2.7K [IMG] Pump, mount, coupling.JPG 02-Sep-2008 10:12 39K [IMG] Pump, mount, coupling_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Raised front inch & half mockup.JPG 02-Sep-2008 10:12 27K [IMG] Raised front inch & half mockup_small.JPG 07-Sep-2011 12:22 2.4K [IMG] Rear of axle pivot to front of clutch shaft.JPG 02-Sep-2008 14:44 349K [IMG] Rear of axle pivot to front of clutch shaft_small.JPG 07-Sep-2011 12:22 3.1K [IMG] Relocated regulator, ignition relay and serial number tag.JPG 02-Sep-2008 10:12 48K [IMG] Relocated regulator, ignition relay and serial number tag_small.JPG 07-Sep-2011 12:22 3.4K [IMG] Starter relay relocated 1.JPG 02-Sep-2008 10:12 37K [IMG] Starter relay relocated 1_small.JPG 07-Sep-2011 12:22 3.2K [IMG] Top of frame to crank center.JPG 02-Sep-2008 14:44 369K [IMG] Top of frame to crank center_small.JPG 07-Sep-2011 12:22 2.9K [IMG] Travel valve pressure test and oil drain port.JPG 02-Sep-2008 14:44 365K [IMG] Travel valve pressure test and oil drain port_small.JPG 07-Sep-2011 12:22 2.7K [IMG] Travel valve relief under cap.JPG 02-Sep-2008 14:44 347K [IMG] Travel valve relief under cap_small.JPG 07-Sep-2011 12:22 2.7K [IMG] Under hood.JPG 02-Sep-2008 10:12 55K [IMG] Under hood_small.JPG 07-Sep-2011 12:22 3.3K [IMG] Unmodified & modified pump mount three quarter inch shorter 2.JPG 02-Sep-2008 10:12 33K [IMG] Unmodified & modified pump mount three quarter inch shorter 2_small.JPG 07-Sep-2011 12:22 2.6K [IMG] Unmodified & modified pump mount three quarter inch shorter 3.JPG 02-Sep-2008 10:12 40K [IMG] Unmodified & modified pump mount three quarter inch shorter 3_small.JPG 07-Sep-2011 12:22 2.9K [IMG] Used bannana plate and new foot control pin.JPG 02-Sep-2008 10:12 18K [IMG] Used bannana plate and new foot control pin_small.JPG 07-Sep-2011 12:22 1.6K [IMG] Voltage regulator and ignition relay relocated. Note engine data plate relocated also.JPG 02-Sep-2008 10:12 40K [IMG] Voltage regulator and ignition relay relocated. Note engine data plate relocated also_small.JPG 07-Sep-2011 12:22 3.3K [IMG] unmodified & modified pump mount three quarter inch shorter 1.JPG 02-Sep-2008 10:12 36K [IMG] unmodified & modified pump mount three quarter inch shorter 1_small.JPG 07-Sep-2011 12:22 2.6K
Apache/2.2.9 (Debian) mod_python/3.3.1 Python/2.5.2 PHP/5.2.6-1+lenny16 with Suhosin-Patch mod_perl/2.0.4 Perl/v5.10.0 Server at www.case-ingersoll-tractors.com Port 80